Got the Scan Tool Diagnostics and it a red colour and they go the car like look like a computer connection but connect near the fuse boxs. then turn the power i mean then ingitons then follwin the intructions then turn the engine on idle then find all the reading for each parts
atfer this we check the codes in the scan tools and find the numbers for the MAF and IAT and Idle control
i got bit confuse about the PIDS to codes well im nt sure i have done it right or not.
i found the problem that some guys unplug the connector then try use the scan tool and it wil showing the iat lost connections. so i found the fault it was the plug was taken it off so i put it bk n plugged it back and now it working.
Rechecking the Data PIDS
they all fixed
clear the code by hit the crase button
Rechck the code again and showed no codes so everything is fine. so you can see the problems occur first land
The paramter it showing all the volts and each number for each part of the engine for example MAP and ECT and it showin the temperature and eveything and pentages. sometime u can find the fualts from the dashboard light flashing somtimes it doesnt show up and gotta use the scan tools and find the faultys.
